Derme, Tiziano, Francis W. M. R. Schwarze, and Benjamin Dillenburger. “Understanding the Role of Controlled Environments for Producing Mycelium-Bound Composites: Advancing Circular Practices for Integrating Biotechnology into the Construction Industry.” Global Challenges 8, no. 7 (2024): 2300197. https://doi.org/10.1002/gch2.202300197

Bitting, Selina, Tiziano Derme, Juney Lee, Tom Van Mele, Benjamin Dillenburger, and Philippe Block. “Challenges and Opportunities in Scaling up Architectural Applications of Mycelium-Based Materials with Digital Fabrication.” Biomimetics 7, no. 2 (2022): 44. https://doi.org/10.3390/biomimetics7020044

Bernhard, M. (2024). Languages of Geometry. In: Eversmann, P., Gengnagel, C., Lienhard, J., Ramsgaard Thomsen, M., Wurm, J. (eds) Scalable Disruptors. DMS 2024. Springer, Cham. https://doi.org/10.1007/978-3-031-68275-9_17

Leschok, Matthias, and Benjamin Dillenburger. 2022. “3D Printed Formwork for Mycelium Bound Composites.” In Hybrids & Haecceities. University of Pennsylvania, Philadelphia, PA.

Bedarf, P., Jeoffroy, E., Dillenburger, B. (2023) Airlements: A Lightweight and Insulating Monolithic Wall System made with Mineral Foam 3D Printing. In: Proceedings of the 43rd Annual Conference for the Association for Computer Aided Design in Architecture (ACADIA).

Ioanna Mitropoulou, Mathias Bernhard, and Benjamin Dillenburger.Nonplanar 3D Printing of Bifurcating Forms.3D Printing and Additive Manufacturing.Jun 2022.189-202. http://doi.org/10.1089/3dp.2021.0023

Ioanna Mitropoulou, Mathias Bernhard, and Benjamin Dillenburger. 2020. Print Paths Key-framing: Design for non-planar layered robotic FDM printing. In Symposium on Computational Fabrication (SCF ’20), November 5– 6, 2020, Virtual Event, USA. ACM, New York, NY, USA, 10 pages. https: //doi.org/10.1145/3424630.3425408

Silvestru, V.-A., Giesecke, R. & Dillenburger, B. (2022). Structural Behavior and Microstructural Characteristics of Colored Kilned Glass Panels. Glass Structures & Engineering. https://doi.org/10.1007/s40940-022-00208-7

Giesecke, R., & Dillenburger, B. (2022). Robotic reconfigurable sand molding for doubly curved glass. Proceedings of the International Society for Intelligent Construction Conference. International Society for Intelligent Construction

Bach, Pascal, Ilaria Giacomini, and Marirena Kladeftira. 2022. “Self-interlocking 3D printed joints for modular assembly of space frame structures.” In Design Modeling Symposium 2022. Berlin, Germany.

Kladeftira, Marirena, Matthias Leschok, Eleni Skevaki, Davide Tanadini, Patrick Ole Ohlbrock, Pierluigi D’Acunto, and Benjamin Dillenburger. 2022. “Digital Bamboo. A study on bamboo, 3D printed joints, and digitally fabricated building components for ultralight structures.” in Hybrids & Haecceities – Proceedings of the 41st Annual Conference of the ACADIA 2022, Philadelphia, 2022.

Tanadini, Davide, Patrick Ole Ohlbrock, Marirena Kladeftira, Matthias Leschok, Eleni Skevaki, Benjamin Dillenburger, and Pierluigi D’Acunto. 2022. “Exploring the potential of equilibrium-based methods in additive manufacturing: the Digital Bamboo pavilion” Proceedings of the IASS 2022.

Kladeftira, Marirena, Matthias Leschok, Eleni Skevaki, and Benjamin Dillenburger. 2021. “Redefining Polyhedral Space Through 3D Printing.” AAG Advances in Architectural Geometry, no. October: 306–29.

Bedarf, P., Szabo, A., Zanini, M., Heusi, A., Dillenburger, B. (2022). “Robotic 3D Printing of Mineral Foam for a Lightweight Composite Concrete Slab”. In: Proceedings of the 27th International Conference of the Association for ComputerAided Architectural Design Research in Asia (CAADRIA), Volume 2, 61-70. https://doi.org/10.52842/conf.caadria.2022.2.061

Bedarf, P., Szabo, A., Zanini, M., Dillenburger, B. (2021). “Machine Sensing for Mineral Foam 3D Printing”. International Conference on Intelligent Robots and Systems: Workshop Robotic Fabrication (IROS), Prague, Czech Republic, September 27 – October 1, 2021, https://doi.org/10.3929/ethz-b-000506097

Bedarf, P., Schulte, D.M., Senol, A., Jeoffroy, E., Dillenburger, B. (2021). “Robotic 3D Printing of Mineral Foam for a Lightweight Composite Facade Shading Panel”. Proceedings of the 26th International Conference of the Association for ComputerAided Architectural Design Research in Asia (CAADRIA), Volume 1, 603-612, http://papers.cumincad.org/cgi-bin/works/paper/caadria2021_005

Giesecke, Rena, Benjamin Dillenburger. 2022. “Large-scale Robotic Fabrication of Polychromatic Relief Glass” In: International Journal of Architectural Computing, Special Issue: Reflections. http://doi.org/10.1177/14780771221082259

Taseva, Yoana, and Nik Eftekhar, Hyunchul Kwon, Matthias Leschok, and Benjamin Dillenburger. 2020. “Large-Scale 3D Printing for Functionally-Graded Façade.” In Proceedings of the 25th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2020), edited by Dominik Holzer, Walaiporn Nakapan, Anastasia Globa, and Immanuel Koh, pp. 183-102. August 5-6. Read the […]

Kwon, Hyunchul, Thodoris Kyttas, and Benjamin Dillenburger. 2019. “Electrical skin: 3D-printed façade panel with integrated electric infrastructure.” In Proceedings of the 14th Conference on Advanced Building Skins, pp. 794-804. Bern: Advanced Building Skins GmbH. October 28-29. Read the full paper here.

Kwon, Hyunchul, and Benjamin Dillenburger. 2019. “Optimized Internal Structures for 3D-Printed Sandwich Elements.” In Proceedings of the IASS Annual Symposium 2019 – Structural Membranes 2019, edited by Carlos Lázaro, Kai-Uwe Bletzinger, and Eugenio Oñate, pp. 1278-1285. Barcelona: International Association for Shell and Spatial Structures (IASS). October 7-10. Read the full paper here.

Anton, Ana, Angela Yoo, Patrick Bedarf, Lex Reiter, Timothy Wangler, Benjamin Dillenburger. 2019. “Vertical Modulations: computational design for concrete 3D printed columns” in Ubiquity and Autonomy 2019 ACADIA conference proceedings.

Leschok, Matthias and Dillenburger, Benjamin. (2019). “Dissolvable 3DP Formwork”. In Ubiquity and Autonomy – Proceedings of the ACADIA Conference – edited by, The University of Texas at Austin, Austin, Texas, 24-26 October 2019.

Leschok, Matthias and Dillenburger, Benjamin. (2019). “Sustainable Thin-Shell 3D Printed Formwork for Concrete”. In Impact: Design With All Senses – Proceedings of the Design Modelling Symposium Conference –, University of the Arts Berlin, Berlin, Germany, 23-25 September 2019.

Anton, Ana. Angela Yoo, Benjamin Dillenburger. “Concrete Extrusion 3D Printing across Disciplines. Opportunities for Customisation pf Underground Infrastructure”. in Swiss Tunnel Congress. ISBN 978-3-033-07202-2. FGU, 2019. pp: 244 – 9.

Hurkxkens, Ilmar, and Mathias Bernhard. 2019. “Computational Terrain Modeling with Distance Functions for Large Scale Landscape Design.” In: Buhmann, E., Ervin, S., Helh-Lange, S., Palmer, J. (Eds.), Journal of Digital Landscape Architecture, no. 4., Wichmann Verlag, Berlin. Link

Kladeftira, Marirena; Pachi, Maria; Bernhard, Mathias; Shammas, Demetris and Dillenburger, Benjamin. (2019). “Design Strategies for a 3D Printed Acoustic Mirror”. In Intelligent & Informed – Proceedings of the 24th CAADRIA Conference – Volume 1, edited by M. Haeusler, M. A. Schnabel, T. Fukuda, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 123-132 […]

Kwon, Hyunchul, and Benjamin Dillenburger. 2018. “An Integrated Robotic 3D-Printing System for Mold-Less Fabrication of Carbon Fiber Composite Building Elements.” In Proceedings of the conference on TxA Emerging Design + Technology 2018, edited by Kory Bieg, Texas, November 8-9. Read the full paper here.

Kladeftira, Marirena; Shammas, Demetris; Bernhard, Mathias and Dillenburger, Benjamin. 2018. “Printing Whisper Dishes. Large Scale Binder Jetting for Outdoor Installations.” In ACADIA 2018: Re/Calibration: On Imprecision and Infidelity, edited by Andrew John Anzalone, Phillip; Del Signore, Marcella; Wit, 328–35. Mexico City, Mexico. Read the full paper here.

Bernhard, M., Hansmeyer, M., & Dillenburger, B. (2018). Volumetric modelling for 3D printed architecture. In L. Hesselgren, A. Kilian, O. Sorkine Hornung, S. Malek, K.-G. Olsson, & C. J. K. Williams (Eds.), AAG – Advances in Architectural Geometry(pp. 392–415). Göteborg, Sweden: Klein Publishing GmbH. download here: research.chalmers.se/en/publication/504188

Kontiza, I., Spathi, T. and Bedarf, P. 2018. “Spatial Graded Patterns – A case study for large-scale differentiated space frame structures utilizing high-speed 3D-printed joints” in Computing for a better tomorrow – Proceedings of the 36th eCAADe Conference – Volume 2, Lodz, Poland, pp. 39-46, edited by Kepczynska-Walczak, A and Bialkowski, S. Download here.

Anton, A and Abdelmahgoub, A. 2018. “Ceramic Components: Computational Design for Bespoke Robotic 3D Printing on Curved Support” in Computing for a better tomorrow – Proceedings of the 36th eCAADe Conference – Volume 2, Lodz, Poland, pp. 71-78, edited by Kepczynska-Walczak, A and Bialkowski, S. Read the full paper here.

Kwon, Hyunchul, Martin Eichenhofer, Thodoris Kyttas, and Benjamin Dillenburger. 2018. “Digital Composites: Robotic 3D Printing of Continuous Carbon Fiber-Reinforced Plastics for Functionally-Graded Building Components.” In Robotic Fabrication in Architecture, Art and Design 2018, edited by Jan Willmann, Philippe Block, Marco Hutter, Kendra Byrne, and Tim Schork, pp. 363-376. Cham: Springer. September 12-15. Read the full […]

Jipa, Andrei, Mathias Bernhard, and Benjamin Dillenburger. 2017. “Submillimeter Formwork. 3D Printed Plastic Formwork for Concrete Elements.” In TxA Emerging Design + Technology, edited by Kory Bieg, Austin, Texas, USA: Texas Society of Architects. Read the full paper here.

Aghaei Meibodi, Mania, Rena Giesecke, and Benjamin Dillenburger. 2018. “Digital Metal: Additive Manufacturing for Casting Metal Parts in Architecture.” Edited by Jay G Sanjayan. 1st International Conference on 3D Construction Printing (3DcP), Melbourne, Australia, November 25-28, 2018 (November): 1–10. http://hdl.handle.net/20.500.11850/322205.

Meibodi, Mania Aghaei, Rena Giesecke, Benjamin Dillenburger, Mania Aghaei Meibodi, Rena Giesecke, and Benjamin Dillenburger. 2019. “3D Printing Sand Molds for Casting Bespoke Metal Connections.” In Intelligent & Informed – Proceedings of the 24th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2019) – Volume 1, edited by Matthias H Haeusler, Marc A […]

Jipa, Andrei, Mania Aghaei Meibodi, Rena Giesecke, Demetris Shammas, Matthias Leschok, Mathias Bernhard, and Benjamin Dillenburger. 2018. “3D Printed Formwork for Prefabricated Concrete Slabs.” 1st International Conference on 3D Construction Printing (3DcP 2018), Melbourne, Australia, November 25-28, 2018. http://hdl.handle.net/20.500.11850/326671.

Aghaei Meibodi, Mania, Andrei Jipa, Rena Giesecke, Demetris Shammas, Mathias Bernhard, Matthias Leschok, Konrad Graser, Benjamin Dillenburger. 2018. “Smart Slab: Computational Design and Digital Fabrication of a Lightweight Concrete Slab.” In ACADIA 2018: Re/Calibration: On Imprecision and Infidelity, edited by Andrew John Anzalone, Phillip; Del Signore, Marcella; Wit, 320–27. Mexico City, Mexico: Association for Computer-Aided […]

Ruffray, N., Bernhard, M., Jipa, A., Aghaei-Meibodi, M., Taisne, N. M. d., Stutz, F., Wangler, T., Flatt, R., Dillenburger, B. (2017). Complex architectural elements from HPFRC and 3D printed sandstone. Paper presented at the RILEM Symposium on Ultra-High Performance Fibre-Reinforced Concrete, Montpellier, France.

Jipa, A., Bernhard, M., Ruffray, N., Wangler, T., Flatt, R., & Dillenburger, B. (2017, 22-24, November, 2017 ). skelETHon Formwork. Paper presented at the SIGraDi 2017, XXI Congreso de la Sociedad Ibero-americana de Gráfica Digital, Concepción, Chile.

Aghaei Meibodi, Mania, Mathias Bernhard, Benjamin Dillenburger and Andrei Jipa. 2017. “The Smart Takes from the Strong”. Fabricate 2017

Wangler, Timothy, Ena Lloret, Lex Reiter, Norman Hack, Fabio Gramazio, Matthias Kohler, Mathias Bernhard, et al. 2016. “Digital Concrete: Opportunities and Challenges.” RILEM Technical Letters 1 (0): 67–75. doi:10.21809/rilemtechlett.2016.16.